You must have javascript enabled to use smokersreview.biz !

BEEKEEPING EQUIPMENT Smoker Gripper Knife Filter Fork Roller Brush

Tensioner...

USD $30.00

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Home & Garden / Yard, Garden & Outdoor Living / Bird & Wildlife Accessories / Bee & Insect Houses

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
BEEKEEPING EQUIPMENT @choice Smoker Gripper Knife Filter Fork Roller Brush Tensioner... Description 1 Fork bent with wooden handle Printing combs before pumping honey is the most important workflow for a beekeeper. Various devices are used to remove wax caps from honeycomb cells. One of the most popular and simple is the honeycomb fork. To work with a fork, you do not need special skills and abilities. The printing process is very simple, even a child will quickly master it. But even experienced beekeepers often prefer to use a fork. It is convenient for her to handle uneven surfaces of honeycombs; with careful work, the honeycombs are practically not damaged. After pumping out the honey, the bees will quickly restore them. The fork consists of two bent steel plates (stainless steel). Between the plates is an insert made of plastic, on which 16 sharp long needles are fixed, also made of stainless steel. The length of the needles is 36 mm, the thickness is 1.5 mm. The handle of the fork is made of solid wood, it fits comfortably in the hand. After work, the fork must be thoroughly rinsed and dried. It is recommended to store inventory in a dry, ventilated area. Length - 210 mm. Width - 72 mm. The length of the needles is 32 mm. The diameter of the needles is 1.5 mm. Weight - 105 g. Base material - stainless steel and plastic. The material of the handle is wood. 2 Smoker large, stainless steel The bee smoker is used by beekeepers to subdue bees when examining the nest. If the smoker is used correctly, the risk of being stung by bees is minimal. The effect of the smoker is based on the natural instinct of bees, namely the fear of forest fires. The design of the smoker is quite simple. It consists of a metal body and bellows. In this smoker model the case is made of stainless steel. Smokers made of stainless steel are more durable than galvanized and made of ferrous metal, but their price is higher. In the body there is a glass for fuel with a slatted bottom, which does not come into contact with the base of the smoker. Air for burning fuel is supplied to the smoker with the help of bellows. These are two wooden planks covered with artificial leather, with a spring in the middle. The large stainless steel smoker has a number of advantages over standard size smokers: refueling once, you can process 7-10 hives, while a standard-sized smoker can handle a maximum of 5, durable inner cup, which prolongs the life of the smoker, replaceable furs and a convenient handle for carrying the smoker. Characteristics: Height - 300 mm. Cup diameter - 136 mm. Weight - 1295 Material - stainless steel, imitation leather. 3 Clamp for frames n / w with a wooden handle When working in the apiary, beekeepers often use a simple but very useful tool - a frame gripper. The fact is that it is almost impossible to pull the frame out of the hive with your hands. In their desire to close up all the cracks, the bees tightly glue the frames to each other and to the walls of the hive with propolis. Attempts to separate the frame by hand often end in nothing. In addition, excessive noise irritates the bees. With the help of the grip, you can easily pull any frame out of the hive and hold it with one hand. This device is used not only by beginners, but also by experienced beekeepers. The grip is placed so that the upper bar of the frame falls between its paws. Then you need to squeeze the grip handles and pull out the frame. The grip design is simple: two stainless steel sides, two wooden handles and two spring elements. But such a simple tool greatly facilitates the work in the apiary. Characteristics: Length - 135 mm. Height - 130 mm. Weight - 0.17 kg. 4 Knife electric apiary The process of unpacking the frames (cutting off the zabrus) before pumping out the honey is very laborious. Beekeepers usually use special bee knives to cut off wax caps. But if the apiary is very large, you can’t do it with an ordinary knife. A more productive tool is needed, otherwise it will take a very long time to print the frames. Such a tool is an electric knife. The electric bee knife is much more productive than a conventional knife or fork. It greatly reduces the time it takes to print frames. The knife consists of a blade with a built-in thermocouple, wires with clips and a wooden handle. The supply current is constant, 12 V. The power sources for the knife can be a battery, a transformer, a car battery, an electric generator. The knife works in short cycles. During the cutting of the seals, it cools down, and while the next frame is being prepared, it is heated up. For more active heating, the knife blade must be periodically cleaned by stretching it along the edge of the vessel or along the edge of the fixed scraper plate. To prevent dirt from sticking, the knife should be placed on a metal or wooden stand during operation. It is recommended to leave the knife switched on without work for no more than 10 minutes. The blade of the knife is made of black metal. It can rust if exposed to moisture. Therefore, after finishing work, the knife must be washed and dried well. Store in a dry place without a cover. Attention! It is not allowed to turn on the knife in the 220 V network. When powered by a step-down transformer, it is allowed to exceed the voltage of 12 V to 15 V during intensive operation of the knife. Specifications: Blade dimensions, mm: 2x40x230. Working voltage: 12 - 15V. Working temperature: 70 - 80 degrees C. Power: 25W. Maximum dry knife temperature: 110 degrees C. Heating time to operating temperature: 40 - 50 s. Knife weight: 300 g. Cord length: 2 m. Power supply: Car battery 12 V (polarity does not matter / Charger for AB 12 V. Step-down transformer 220/12 V. 5 Chisel 160 mm galvanized The chisel is the main tool of the beekeeper. There is a rule - do not open the hive without a chisel. The fact is that all the cracks in the hive and between the frames of the bees are sealed with propolis. As a result, the frames are so tightly glued to one another that they cannot be detached by hand. And with the help of a chisel, pulling out the frame is much easier. The chisel also serves to perform other work: separating the hive bodies from each other, opening and closing of gate barriers, cleaning the hive during repairs, removing old paint, cleaning the sides and bottom of the hive, frame slats. The chisel is made of galvanized steel. One of its ends is widened and sharpened on both sides, and the other is bent and sharpened on one side. A wooden handle is attached to the steel base. The surface of the chisel is smooth, so after work it can be easily cleaned of dirt. length - 160 mm, height - 40 mm, width - 35 mm, weight - 95 g. material - galvanized steel, wood Shipping
Shipping and tracking Items are delivered via Ukrpochta. Delivery is carried out by the sender worldwide (international economy shipping). Shipping cost included in the price of the lot. Immediately after shipment you receive a full photoreport of the sent parcel, including the photo of the parcel with sticker with your address, receipt of the postal service (and) the track number. The dispatch is made within 24 hours after payment. The delivery of item usually takes 14-45 days depends of destination. Please, be patient!)                                             Payments Payment Policy
Note that our store only accepts PayPal as a payment method, however PayPal accepts all major credit cards.
Payment must be received within 3 days after the auction is closed. In the Spirit of the eBay Marketplace, your Bid or Buy-It-Now selection is a commitment to purchase the item as advertised!
Return Policy You should know,  there are some restrictions and prohibitions which may applied in some countries on the import of certain pharmaceutical products. If the parcel will be stopped to pay custom duty or detained at Your country on customs, you ll take full responsibility. In this case the money refund is not provided by the seller. Customs Declaration honestly placed on the parcel by seller.
Buy-It-Now only items may be returned in an UNUSED condition within 14 days.
Return shipping charges are the responsibility of the customer. A trackable & insured shipping method is strongly recommended as we are not responsible for merchandise that has not reached our facility.
Important Return Facts: All returns will be inspected prior to a refund being issued to ensure the item is in unused condition. Buyer is responsible for all shipping costs and any applicable duties and taxes.
Refunds will be issued within 7 business days of inspection of the item. Feedback
Dear buyers, we appreciate your business, if you are satisfied with our service, please rate the details of the transaction (Detailed Seller Ratings) on eBay. If you have any questions, please contact us first, simply leaving negative or neutral feedback can't solve the problem.
Contact Us If you have any questions or problems, we are very glad to help you. Please contact us for free. Please note  other  our  auctions.  We offer  wholesale discounts and combined packages
BEEKEEPING EQUIPMENT Smoker Gripper Knife Filter Fork Roller Brush Tensioner...
See more
Price type
IN STOCK OUT STOCK